|
 |
Digitally-displayed calculator is for measurement oxygen and component value of hot metal and molten steel with expendable probe.
From reading input signal to calculation of component value, it is automatically operated. Therefore, it does not need to read the record chart and calculate the reduction of component value. It is possible to get the result quickly at job site.
|
_ Corresponding to KAWASO component sensor probe
_ High speed arithmetic processing of signal from sensor
_ Output the measurement condition at real time by auto-detect
_ Rank determination of input signal waveform
_ Incorporate touch panel display
_ Portable size
_ Print output the measurement result
_ Corresponding to network (Option)
|
| Input signal |
Thermocouple 1 point (JIS type R or B, specify with order)
Component sensor 1point (+/- 1V)
Input resistance : 1M
|
| Display |
Touch panel type display
Display element : STN monochrome LCD
Display size : 320 x 240 dot
|
| Sampling speed |
100ms (Fixed) |
| Responding speed |
100% by step input, below 160ms (0 ---> 90%) |
| Burnout |
Uprising (Burnout time approx. 4 sec) |
| Total accuracy |
Thermocouple : +/- 3.0 Degree C
Component sensor : +/- 1mV
|
| Printer |
Dot matrix : 24 digit,
Width of paper : 57.5mm,
Print speed : Approx. 2.5 line/sec
|
| Weight |
Approx. 7 kg |
| Dimension |
370(W) x 177(H) x 350(D) (Except handle) |
| Operating temp |
0 - 50 |
| Voltage |
AC100 - 240V 50/60Hz |
|
